Carrier Access Access Navigator Manual De Usuario
5-12
August 2003
Access Navigator - Release 1.8
Physical Installation
Install Crossbars
Install Crossbars
1. Position Vertical Mount Crossbars (refer to office records) so that inside mounting holes are 18.375
inches apart (see A in Figure 5-7 on
).
2. Attach crossbars to equipment rack with appropriate mounting screws (see B in Figure 5-7).
Attach Mounting Brackets to Access Navigator
NOTE:
Universal rack mounting bracket kit includes hardware that is not required for
installation using crossbars.
1. Open bag containing the universal rack mounting kit and select the following items (see A in Figure
•
Mounting brackets (2 ea.), PN 0040303 (stamped on part)
•
Mounting screws (4 ea.), 12-24 × 5/8inch, for attaching brackets to crossbars
2. Position mounting brackets for required flush mount or 5-inch forward offset with respect to front
rails of equipment rack (see B in Figure 5-8).
3. Remove four mounting screws (6-32 × 3/8 inch, 82º undercut, Phillips) from each side of Access
Navigator where brackets will be attached.
4. Attach mounting brackets to each side of Access Navigator using the mounting screws removed in
previous step (see C in Figure 5-8).
Attach Access Navigator to Crossbars
CAUTION!
A
CCESS
N
AVIGATOR
REQUIRES
AT
LEAST
0.75
INCH
OF
FREE
AIR
SPACE
ON
LEFT
AND
RIGHT
SIDE
OF
CHASSIS
FOR
AIR
CIRCULATION
. I
NSUFFICIENT
SPACING
MAY
CAUSE
SERVICE
INTERRUPTIONS
,
RESULTING
FROM
EQUIPMENT
OVERHEATING
AND
SHUTTING
DOWN
. I
F
INSTALLING
MORE
THAN
ONE
ROW
OF
UNITS
,
ENSURE
THAT
UNITS
ARE
MOUNTED
DIRECTLY
ABOVE
OR
BELOW
UNITS
IN
OTHER
ROWS
TO
MAINTAIN
UNOBSTRUCTED
VERTICAL
AIR
CIRCULATION
.
1. Position Access Navigator vertically in crossbar slot (refer to office records) with 1.75 inch
minimum bracket spacing (3 holes) between other brackets in row (see Figure 5-9 on
2. Secure mounting brackets to crossbar using 12-24 × 5/8inch mounting screws (see D in Figure 5-8
).