Carrier Access 1750 Manual De Usuario

RFC 1577 support is also known as Classical IP (CIP) over ATM. CIP is provided as a 
path for controlling multiple Broadmore 1750s when IP connectivity over Ethernet is 
not available to all of the installed Broadmore 1750s. Control signals are sent to a 
Broadmore 1750 over the ATM if the Broadmore 1750 is not on the Ethernet with the 
control station. As a prerequisite, the configuration process must be completed. 

Configuration forms the Broadmore 1750s into a subnetwork, with either an ATM 
switch or workstation designated the server and others designated as clients. The server 
maintains a Logical IP Subnetwork (LIS), which cross-references logical IP addresses 
to ATM addresses. When the control station sends IP traffic (e.g., control signals) via 
the subnetwork IP address to a Broadmore 1750, the server uses LIS data to tell the 
sender an equivalent ATM address to use in place of the IP address. The IP datagrams 
are then sent over the ATM network to the desired Broadmore 1750, which takes 
appropriate action and responds. The control station has full communications with the 
Broadmore 1750 over ATM/Ethernet. Control is identical to control over Ethernet, and 
the ATM control path is essentially transparent to the user.

Follow the path shown to reach the CIP over ATM configuration items. These items 
are listed in the following table.

Select System Management

 

↵

Select Configuration

 

↵

Select System Services

 

↵

Select CIP over ATM 

↵