Carrier Access 1750 Manual De Usuario
Broadmore 1750 - Release 4.6
11-15
Security Management (FIPS Mode)
Network Time Protocol
Network Time Protocol
The Broadmore CPU system clock provides the time and date stamp used for system
logs, events, and audit trails. A SuperUser must set the system clock either manually
after powering up the Broadmore (see “System Clock” on page
logs, events, and audit trails. A SuperUser must set the system clock either manually
after powering up the Broadmore (see “System Clock” on page
) or configure the
Broadmore to use a network time source as described below. The Broadmore uses
Simple Network Time Protocol (SNTP), which is an Internet standard for periodically
synchronizing the system clocks connected to an IP network.
Simple Network Time Protocol (SNTP), which is an Internet standard for periodically
synchronizing the system clocks connected to an IP network.
If the clock uses the NTP source, the system clock will be automatically synchronized
to the NTP source when power is reapplied to the Broadmore.
to the NTP source when power is reapplied to the Broadmore.
Select NTP from the Administration menu. Then set the following parameters to the
desired values. When finished, press Escape and select Yes to accept the changes.
desired values. When finished, press Escape and select Yes to accept the changes.