Carrier Access 1750 Manual De Usuario
12-36
Broadmore 1750 - Release 4.6
SNMP Configuration
Target Parameters
NOTE:
Selecting Validate Table will check that each Parameter Name
in this table exists in the Notify Profiles table.
The following table describes the selections.
Item
Options
Comments
Parameter Name
string
Value for Parameter Name, 1 to 30 characters.
Note: This entry must agree with the Parameters
Name in the Notify Profiles table (see “Notify
Profiles” on page
Note: This entry must agree with the Parameters
Name in the Notify Profiles table (see “Notify
Profiles” on page
User Name
string
Value for User Name, 1 to 30 characters.
Security Model
V1
V2
USM
V2
USM
The Security Model used in processing an SNMP
query from a client. This parameter can be used to
restrict access to the managed objects based on the
security model set for a group.
query from a client. This parameter can be used to
restrict access to the managed objects based on the
security model set for a group.
Security Level
None
AuthnoPriv
AuthPriv
AuthnoPriv
AuthPriv
None – the incoming request requires no
authentication or encryption.
authentication or encryption.
AuthnoPriv – authentication is required but SNMP
messages will not be encrypted.
messages will not be encrypted.
AuthPriv – authentication is required and SNMP
messages are encrypted.
messages are encrypted.
MP Model
V1
V2
V3
V2
V3
Message Processing model
Enabled
Enabled
Disabled
Disabled
Enables/disables this target parameter.
Storage
Volatile
Non-volatile
Permanent
Readonly
Other
Non-volatile
Permanent
Readonly
Other
Settings lost without power.
Settings can be changed.
Settings can not be deleted.
Settings can not be changed.
Settings can be changed.
Settings can not be deleted.
Settings can not be changed.