Carrier Access 1750 Manual De Usuario

This Appendix provides methods for demonstrating IPv6 functionality on Broadmore. 

You can find more test methods in the Product Application Notice: Broadmore IPv6 
(PAN-07-0001), which is available on the Customer Support website.  

When the system boots up, an IPv6 address of link-local scope is configured on all the 
network interfaces. This section provides steps to configure a network interface.

To set the IPv6 address on the Ethernet interface, from the Broadmore shell issue the 
command ifconf6 with the argument -a.  For example:

Broadmore-> ifconf6 1 -a 3ffe:0:0:13::5

The above command sets the IPv6 address 3ffe:0:0:13::5 on the Ethernet 
interface 1.

Check the interface configuration.

Broadmore->ifconf6 1

     Interface Name            : 1

     Index number              : 2

     Type                      : ETHERNET

     Inet6 Address             : fe80::2e0:97ff:fe6b:7ffe

     Prefix Mask               : ffff:ffff:ffff:ffff::

     Flags                     : 0 <>

     Inet6 Address             : 3ffe:0:0:13::5

     Prefix Mask               : ffff:ffff:ffff:ffff::

     Flags                     : 0 <>