Carrier Access 1750 Manual De Usuario
Broadmore 1750 - Release 4.6
5-15
Module and Fan Installation
Tools
Tools
The following tools are recommended to install, configure, operate, and maintain the
Broadmore 1750:
Broadmore 1750:
#1 flathead screwdriver (for cover and fan tray removal/installation)
Dual jeweler’s flathead/Phillips screwdriver
ESD wrist strap
Other standard installation tools as desired.
Remove Front Chassis Cover
Only the front cover must be removed to install the fan tray.
1. Loosen captive screws securing the front cover and set the cover aside.
2. Connect an ESD wrist strap to the front or rear ESD connector and follow
standard ESD procedures while handling unit components.
WARNING!
U
SE
ESD
PRECAUTIONS
: W
EAR
AN
ESD
GROUNDING
STRAP
WHILE
HANDLING
ANY
MODULES
OR
ACCESSING
THE
INSIDE
OF
THE
B
ROADMORE
1750. F
AILURE
TO
FOLLOW
ESD
PROCEDURES
MAY
DAMAGE
SENSITIVE
COMPONENTS
AND
VOID
THE
WARRANTY
.
Fan Tray Installation
1. The fan tray installs from the front, directly below the modules. Fan tray guides
are provided on each side of the chassis. Slide the fan tray into the guides and
firmly push it into place so that connectors totally seat with the midplane.
firmly push it into place so that connectors totally seat with the midplane.
2. Tighten the two front panel retaining screws using a flathead screw driver.