Technicolor - Thomson 210i Manual De Usuario
SpeedTouch 210i
9
◊
ISDN switch type.
◊
ISDN telephone number(s).
Before you set up the router, you need to know the default settings of the SpeedTouch
210i as shown below:
Factory Default Settings:
Default IP Network Settings:
IP Address: 10.0.0.139
Subnet Mask: 255.0.0.0
Subnet Mask: 255.0.0.0
DHCP Server: Disabled
Web Configurator:
Username: admin
- Password: <blank>
Note: Blank means no password required.
- Password: <blank>
Note: Blank means no password required.
Telnet Console:
Password: <blank>
Note: Blank means no password required.
Note: Blank means no password required.
Management from the Internet: Not allowed
Virtual TA Server: Enabled
Remote Dial-In Server: Disable
The following section outlines how to connect your SpeedTouch 210i to your LAN and
ISDN line. Refer to the diagrams below to identify all of the ports on your device when
you make connections.
ISDN line. Refer to the diagrams below to identify all of the ports on your device when
you make connections.