Carrier Access CMG Router Manual De Usuario

Use this screen to define filters that are based on specific protocols being used by LAN 
devices. These filters, when enabled, provide security by restricting LAN/WAN access 
based on a specific protocol. 
Protocol Name - Filter name can be up to 7 characters.
Ethernet Value - Enter the assigned Ethernet value for this protocol, see Addendum B, 
Ethernet Protocol Types. 
IEEE Value - Enter assigned IEEE value for this protocol. The IEEE value is the same 
as the DSAP and SSAP values in a SNAP packet.

NOTE:  Only identify either an Ethernet or IEEE value, but not both. 

To enable a filter return to the Enabled Filter Window ([E

] from this window) and 

select [C

 A], select filter type (Custom, Protocol or Address) filter will be added to 

the Enabled Filters window.

NOTE:  Each filter, even if it is not enabled, will count toward the maximum 
number of 500 filters.