Carrier Access CMG Router Manual De Usuario

This screen allows you to filter the Remote (WAN) networks/servers in two ways, 
depending on which mode is selected. The <Filter> mode causes the unit to learn all 
networks/services on known networks, and then advertise these services to the LAN. 
In the <Learn> mode the unit will disable or restrict learning of networks/services. 
Under this mode, services will only be learned if they are selected or added. For 
example, when you enter the current screen, all known networks/services will be 
displayed, since the <Filter> mode is the default mode. If you wish to restrict which 
services are learned you may change the Selected Items field to <Learn> and then 
enable only selected services displayed on the screen. Once you exit this screen and 
save the changes, only those services that you enabled and/or added will be learned and 
displayed.
Since the <Filter> mode learns all services, it may be most appropriate for smaller 
networks. The <Learn> mode however, may be best for larger networks since it allows 
you to restrict which types of services are learned. 

1. On the Main Menu, press [T

] until Configuration <Profile Directory> is 

highlighted, and press [E

].

2. Select WAN <Setup -> on the RemoteUnit line and press [E

].