Carrier Access CMG Router Manual De Usuario
5-36
CMG Router - Release 2.7
Profile Directory:Remote Profile
Filter Network/Server
NOTE:
The server type 0004 was selected to be advertised to the LAN, therefore
all 0004 type servers will be advertised and do not need to be individually selected
(lines 2 through 4).
(lines 2 through 4).
If the server type and name are specified, only servers that match both values will be learned or
filtered. Be aware that the Name value is case and spacing sensitive.
filtered. Be aware that the Name value is case and spacing sensitive.
Network
This field displays the network address of each service/network learned from the remote unit.
If this route was added using the Static Network screen, “Static Fltr” will appear before the
network address of this entry.
If this route was added using the Static Network screen, “Static Fltr” will appear before the
network address of this entry.
Type
This field is only available when the Setup field is set to <IPX Servers>. The Type field
displays the Hex value assigned to each known server. When a service is added using
displays the Hex value assigned to each known server. When a service is added using
[C
TRL
A]
, a Hex value must be defined. If you wish to learn or filter certain services that match
a particular server type, manually add an entry specifying the desired Hex value. This setting
will enable the unit to learn or filter all services that match the specified service type. This field
may be used in conjunction with the Name field, described below. Range 1-FFFF.
will enable the unit to learn or filter all services that match the specified service type. This field
may be used in conjunction with the Name field, described below. Range 1-FFFF.