Carrier Access CMG Router Manual De Usuario

set 1 default

Set Router to default settings

disconnect a:1

Disconnect all connections to the T1 on the 
Controller (slot a)

disconnect 1

Disconnect all connections to the router in slot 1

set clock1 a:1

Set primary master transmit clock source 

set a:1:all type data

Set the T1-1 of the Controller, Type to Data

connect a:1:all 1:1:1

Connect all of T1-1 to the Router that is in slot 1

rename 1 "LocalAdit" "Denver"

Rename the Adit 600 from "LocalAdit" (default) 
to "Denver" (LAN)

rename 1 "RemoteAdit" "wan1"

Rename WAN #1 from "RemoteAdit" (default) to 
"wan1"

set 1:1 ip address 2.2.2.1 
255.255.255.0

Set the ethernet IP address, in the conventional IP 
address format. (Router LAN)

set 1:1 phy auto

Set the Physical Specifications to auto-negotiate 

add 1 "wan1" static ip network 
1.1.1.0 255.255.255.0 1

Adds a static IP network (route) to the WAN 
interface

set 1 "wan1" trunk 1

Set the WAN interface named "wan1" to be 
mapped to trunk 1

reset 1

Reboot the router, to enable all configurations set