Carrier Access CMG Router Manual De Usuario

Determines the type of protocol encapsulation that will be used for the selected WAN. 

Point-to-Point Protocol.  

Provides a standard means of encapsulating data packets sent over a 

single-channel WAN link. PPP is the standard WAN encapsulation protocol for the inter- 

operability of bridges and routers.

Point-to-Point Protocol encapsulated in Frame Relay.

A packet-switching protocol for connecting devices on a WAN. Frame Relay networks in the U.S. 
support data transfer rates at T1 (1.544 Mbps) and T3 (45 Mbps) speeds. Frame Relay service is 
provided for customers who want connections at 56 Kbps to T1 speeds.

Field displays only  if <PPP> is selected for the WAN Connection Type.

The Multilink Group will specify a trunk as part of a multilink PPP group. Selection is: <None> 
or <1> through <24>. Available on when PPP connection type is selected.

The Data Speed will specify the data speed for each DS0 in the given trunk. Selection is: <56K> 
or <64K>. Default is 64K.

Defines the maximum percentage of bandwidth allowed on this trunk for voice calls. The 
remaining percentage to be reserved for routed or bridged data. Routed or bridged data is 
allowed to use any available bandwidth, but it is a lower priority than voice. Range is 0 - 100.

Disables the PVC (Permanent Virtual Circuit) management.

Frame Relay standard

  Poll Interval - Range is between 5-30
  Poll Counter - Range is between 1-255

Local Management Interface

 Poll Interval - Range is between 5-30
 Poll Counter - Range is between 1-255