Carrier Access 770-0015 AM Manual De Usuario
7-2
IP Router - Release 1.8
Verification Window
Ping Utility
Ping Utility
Use this option to verify any communication problems between the Router and various
devices connected to your LAN or at a Remote location. Problems are detected when a
“ping” is sent to a device. If the device echoes back to the Router, then communications
are operating normally. If no echo returns, then further investigation is needed. Devices
must be running TCP/IP software in order for the ping to be successful.
devices connected to your LAN or at a Remote location. Problems are detected when a
“ping” is sent to a device. If the device echoes back to the Router, then communications
are operating normally. If no echo returns, then further investigation is needed. Devices
must be running TCP/IP software in order for the ping to be successful.
A single ping may be used, where only one packet is sent to the device being tested, or
a continuous ping to the device until you manually terminate the test. Continual pinging
may help identify intermittent communication problems. Please note that when pinging
a device on a remote LAN, it is not unusual for the first ping to fail.
a continuous ping to the device until you manually terminate the test. Continual pinging
may help identify intermittent communication problems. Please note that when pinging
a device on a remote LAN, it is not unusual for the first ping to fail.
NOTE: In order to perform LAN port testing, the selected frame type must
be Ethernet II and the Router’s IP Address must be configured.
be Ethernet II and the Router’s IP Address must be configured.
1. On the Main Menu, press [T
AB
] until Ping Utility is highlighted on the
Verification option.