Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Carrier Access
  4. none
  5. Manual De Usuario

Carrier Access none Manual De Usuario

Descargar
Página de 496
2-14
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
User Mode
show interface ethernet
Use the show interface ethernet command to display the Ethernet interface information.   
Syntax:
> show interface ethernet 
port 
Example:
Adit 3500> show interface ethernet 1
 
Device=Ethernet 1   State=running   IP/Mask=192.168.1.1/255.255.255.0
         Dependency=None
  Status: Connected;  Link: 10T-HD
  Tx (Packets/Bytes/Dropped/Errors)=(1620/1643674/0/0)
  Rx (Packets/Bytes/Dropped/Errors)=(1636/143050/0/0)
  Broadcasts (Tx/Rx)=(0/0)  Multicasts=0  Collisions=0
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
show interface multilink
Use the show interface multilink  command to display the multilink configuration information.
Syntax:
> show interface multilink 
port 
Example:
Adit 3500> show interface multilink 1 
Device=mlink-1      State=down      IP/Mask=Unnumbered
         Dependency=t1-1,t1-3
  Status: Disconnected
Example:
Adit MSR> show interface multilink 1 
Device=mlink-1      State=down      IP/Mask=Unnumbered
         Dependency=LCC1,LCC2
  Status: Disconnected
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
port
Ethernet port number.  Range = 1-2.
Field
Definition
port
Multilink port number. 
Adit 3104, Adit 3200, Adit 3500:  Value must be 1.
MSR:  Range is 1-8