Carrier Access none Manual De Usuario

Use the show ip ospf database command to display information related to the OSPF database for 
a specific router. The various forms of this command deliver information on defined OSPF link 
state advertisements.   

address|self-originate}

link-state-id|adv-router 

address|self-originate}

link-state-id] [adv-router 

address|self-originate]

adv-router address Displays all the LSAs of the specified router. If no IP address is 

entered, the local router information will be displayed (same as self-
originate).

Portion of the Internet environment that is being described by the 
advertisement. The value entered depends on the advertisement's LS 
type. It must be entered in the form of an IP address. When the link 
state advertisement is describing a network, the link-state-id can take 
one of two forms: 
1. The network's IP address (as in type 3 summary link advertisements 
and in autonomous system external link advertisements). 
2. A derived address obtained from the link state ID. (Note that 
masking a network links advertisement's link state ID with the 
network's subnet mask yields the network's IP address.) 
When the link state advertisement is describing a router, the link state 
ID is always the described router's OSPF router ID. 
When an autonomous system external advertisement (LS Type = 5) is 
describing a default route, its link state ID is set to Default Destination 
(0.0.0.0). 

Displays information only about the network LSAs.

Displays information only about the Router LSAs.

Displays only self-originated LSAs (from the local router).

Displays information on.ly about the summary LSAs.