Carrier Access none Manual De Usuario

Use the show ip ospf neighbor command to display OSPF neighbor information.   

address|neighbor-id|detail] 

   ID          Pri   State        Dead Time     Address         Interface

10.199.199.137  1    FULL/DR       0:00:31    192.168.80.37      Ethernet1

172.16.48.1     1    FULL/DROTHER  0:00:33    172.16.48.1        Fddi0

172.16.48.200   1    FULL/DROTHER  0:00:33    172.16.48.200      Fddi0

10.199.199.137  5    FULL/DR       0:00:33    172.16.48.189      Fddi0

   Neighbor 10.199.199.137, interface address 192.168.80.37

    In the area 0.0.0.0 via interface Ethernet0

    Neighbor priority is 1, State is FULL

    Options 2

    Dead timer due in 0:00:32

    Link State retransmission due in 0:00:04

 Neighbor 10.199.199.137, interface address 172.16.48.189

    In the area 0.0.0.0 via interface Fddi0

    Neighbor priority is 5, State is FULL

    Options 2

    Dead timer due in 0:00:32

    Link State retransmission due in 0:00:03

  Neighbor 192.168.5.2, interface address 10.225.200.28

    In the area 0 via interface GigabitEthernet1/0/0

    Neighbor priority is 1, State is FULL, 6 state changes

    DR is 10.225.200.28 BDR is 10.225.200.30

    Options is 0x42

    LLS Options is 0x1 (LR), last OOB-Resync 00:03:08 ago

    Dead timer due in 00:00:36

    Neighbor is up for 00:09:46

   Index 1/1, retransmission queue length 0, number of retransmission 1

    First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)

    Last retransmission scan length is 1, maximum is 1

    Last retransmission scan time is 0 msec, maximum is 0 msec

 interface address

Optional parameter. Enter interface IP address to define display.

 neighbor-id

Optional parameter. Enter neighbor IP address to define display.

Optional parameter. Enable display of detailed information.