Technicolor - Thomson 780 (WL) Manual De Usuario
9
E-DOC-CTC-20051017-0153 v1.0
Chapter 1
Getting to know your SpeedTouch™
To start a Telnet
session
Proceed as follows:
1
Open a telnet application.
2
Connect to your SpeedTouch™.
3
Enter your SpeedTouch™ security user name and password.
As soon as you have opened a session to the CLI, the SpeedTouch™ banner is
displayed, followed by the CLI prompt, as shown in the example below.
displayed, followed by the CLI prompt, as shown in the example below.
You can use the Command Prompt window.
In Microsoft Windows XP for instance:
1
On the Windows taskbar, click Start.
2
Select (All) Programs > Accessories > Command Prompt
.
In the Command Prompt window:
At the prompt, type
telnet
followed by the IP address of your
SpeedTouch™ (192.168.1.254 by default).
The default user is ‘Administrator’ and the default password is blank.
Username : Administrator
-----------------------------------------------------------------------
-
*
-----------------------------------------------------------------------
-
*
______
SpeedTouch
*
___/_____/\
*
/
/\\
Version 5.4
*
_____/__
/
\\
*
_/
/\_____/___ \
Copyright (c) 1999-2005,
*
//
/
\
/\ \
THOMSON
*
_______//_______/
\
/ _\/______
*
/
/ \
\
/
/ /
/\
*
__/
/
\
\
/
/ /
/ _\__
*
/ /
/
\_______\/
/ /
/ /
/\
* /_/______/___________________/ /________/ /___/
\
* \ \
\
___________
\ \
\ \
\
/
*
\_\
\
/
/\
\ \
\ \___\/
*
\
\/
/
\
\ \
\
/
*
\_____/
/
\
\ \________\/
*
/__________/
\
\
/
*
\
_____
\
/_____\/
*
\ /
/\
\
/___\/
*
/____/
\
\
/
*
\
\
/___\/
*
\____\/
-----------------------------------------------------------------------
{Administrator}=>
{Administrator}=>