ACTiSYS PP2-5600 Manual De Usuario

 

Infrared Modem User’s Manual 

 

 

Page 8 of 

41

Revision 1.0 

2003/11 From 3JTech 

 

3) 

Turn the switch to Serial on the rear of modem. Then please read the Software 

Installation chapter.  

 

Connect the cable for PDA (PP2-5600 Version) to the cradle of your PDA. Push 

the switch to Serial. Next, please see the Installation Guide. 

 

By IR Port    (Only for PP2I-5600 models.) 

Please read the Installation Guide for IR. 

 

The colour of LED is tells the modem is Power on. 

When switching the switch to MR or IR of the modem, the modem powers on. 

The GREEN LED should light on when it is ready to connect.   

Red: 

When the battery is low (under 4V), the Red LED would light. Please recharge 

the battery or replace the battery. 

 

Use terminal and AT command to control power down mode: 

1.  Enable power-down mode: 

Issue “ATS63.1=0”. ( Def.) 

2.  Disable power-down mode: 

Issue “ATS63.1=1”.