Actiontec electronic WNS100-250 Manual De Usuario

Actiontec Wireless Network Attached Storage Device User Manual

Chapter 2 Configuring the NAS Device

USB Devices

USB

hard drive or

USB

Memory Disk (flash memory disk) can be inserted in the

NAS

Device’s

USB

port at any time. Once the

USB LED

on the front panel comes on

and stays on, the

USB

device is available for use.

For a

USB

hard drive, the Device can recognize the

FAT

and

NTFS

file formats.

Removing a USB device - Method A (USB Hard Drive)

1. Press the “

USB

Eject” button on the rear panel. The

NAS

Device beeps.

2. Wait for the

USB LED

to start blinking slowly.

3. Remove the

USB

device.

Removing a USB device - Method B (USB Flash Drive)

1. Click the Flash Utility icon in the computer desktop’s system tray.

2. Select Safely Remove Drive.

3. Select the desired

NAS

Device.

4. Click Eject.

5. Wait for the

USB LED

to start blinking slowly. (The program will also display a

message when it is safe to physically detach the

USB

device.)

6. Remove the

USB

device.

☞

Note: If the

USB

device is not removed, it will not be re-con-

nected. The USB device must be removed and re-inserted to re-
connect.

Adding a Print Server

If a

USB

printer is connected to the

NAS

Device, the Device can be used as a print

server. To do this, follow these instructions (this installation is for Windows

only

; other operating systems may have a slightly different procedure):

1. Plug a

USB

printer in the

USB

port on the rear panel of the

NAS

Device.