3com 5102B-EE Manual De Usuario

This section explains how to access Bridge Management, enter and edit 
commands, get help, view, modify, and save parameters. This section also 
describes how to display status information about your network and your 
Bridge Module.

Note: Bridging software enables you to execute Management 

commands regardless of bridging activity. Therefore, 
bridging performance will be affected for the duration of 
the command execution.

Refer to the section titled “Connecting a Terminal” in Chapter 2 for 
instructions on connecting your terminal to the Management Interface 
(RS-232 port).

You manage the Bridge Module by entering commands at the 
management prompt. The default management prompt is “OEBM>," but 
can be customized. Use the keys described in Table 3-1 when entering 
commands on the command line.

If the management prompt appears as “>>," it means 
that the current Flash EPROM is faulty and that the 
system is running off the Boot PROM (a subset of the 
operational code). Type the HELP command for 
information on the V1.3 command set. This command 
set will keep your bridge operational, but with reduced 
capabilities.

Contact 3Com Customer Support as outlined in Appendix E.