3com 5102B-EE Manual De Usuario
Management Functions 3 - 5
Examining Parameters
The SHOW command lists the current value of any parameter you specify.
For example, the SHOW SPANTREE command displays the current spanning
tree parameters, as shown below.
For example, the SHOW SPANTREE command displays the current spanning
tree parameters, as shown below.
OEBM> show spantree [ENTER]
Spanning Tree Parameters:
Mode
Enabled
Bridge Priority
0
Path Cost Port 1
10
Path Cost Port 2
10
Hello Time (sec)
2
Forward Delay Time (sec)
15
Listen Time (sec)
20
Spantree Hello Address:
01-80-C2-00-00-00
The SHOW DEVICE command displays the current device parameters and
values for the Bridge Module.
values for the Bridge Module.
OEBM> show device [ENTER]
ONline Ethernet Bridge Module (OEBM); SNMP Management
Name: OEBM
Boot EPROM Version: v1.3
Serial
Number: 330658
Restarts: 7
Flash EPROM Version: v2.0
Service Date:
/ /
Location:
3rd Floor Engineering
Port 1
Port 2
MAC Address:
08-00-8F-10-17-48
08-00-8F-10-17-49
IP address
127.0.0.1
127.0.0.1
Subnet Mask
FF.FF.FF.00
FF.FF.FF.00
Default Gateway 0.0.0.0 0.0.0.0
For assistance contact:
Network Administrator
Diagnostics: ENABLED
SQE Mode: NORMAL