Alvarion SW VERSION 5.1 Manual De Usuario

Chapter 4 - Operation and Administration 

 

BreezeACCESS VL System Manual

 

The Network Management Parameters menu enables protecting the Unit from 
unauthorized access by defining a set of discrete IP addresses as well as IP 
address ranges from which the unit can be managed using protocols such as 
Telnet, FTP, TFTP, SNMP, DHCP and ICMP. This excludes management messages 
generated in the unit, such as Traps or Ping Test frames, which are not filtered. 
The direction from which management access is permitted can also be 
configured, which means that management access may be permitted from the 
wireless medium only, from the wired Ethernet only, or from both. 

The Network Management Menu also enables managing transmission of traps, 
including definition of up to 10 traps destination IP addresses and the associated 
community strings. In addition, the menu enables specifying the IP address of a 
connected AP client device to facilitate remote management of a BreezeACCESS 
WI

2

 system.  

The Network Management Parameters menu includes the following options: 

„ 

Access to Network Management 

„ 

Network Management Filtering 

„ 

Set Network Management IP address 

„ 

Delete a Network Management IP Address 

„ 

Delete All Network Management IP Addresses 

„ 

Set/Change Network Management IP Address Ranges 

„ 

SNMP Traps (AU only) 

„ 

Wi2 IP Address (SU only) 

4.2.6.3.1  Access to Network Management  

The Access to Network Management option defines the port through which the 
unit can be managed. The following options are available: 

„ 

From Wireless Link Only 

„ 

From Ethernet Only 

„ 

From Both Ethernet and Wireless Link