Sanyo Micro Hi-fi System - 10 Watts DC-DA1160 DCDA1160 Manual De Usuario

Unwind the aerial wires, then connect them
to the AM LOOP terminals. Place the loop
aerial in a position which yields the best AM
reception, or attach it to a wall or other sur-
face as shown in figure.

Note:
To minimize noise, the speaker, mains and
any other leads should not come close to
the indoor or external aerial lead and AM loop
aerial. Do not place the aerial leads close to
the system.

Connect stereo headphones (not supplied) to the PHONES socket for
monitoring or for private listening. The speakers are automatically discon-
nected when headphones are connected.

Screws (not supplied)

(4   MIN)

BEAT CUT

1–
2–

FM aerial

AM loop Aerial

L ch speaker

To an AC outlet

R ch speaker

Note:
-

Do not connect the mains lead to an AC outlet until all connections
have been made.

-

The system is not completely disconnected from the mains when the
z/ON button is set to the z position.

Connect the connector of the left speaker lead to the “L” SPEAKERS
socket and the connector of the right speaker lead to the “R” socket.
If you have difficulty inserting the speaker lead connector, turn it over and
reinsert it.

FM indoor aerial is sufficient to receive broadcasts. Extend the aerial wire
as straight as possible and, while listening to the sound from the system,
secure it in a position which yields minimal distortion and noise.

Assemble the loop aerial as shown in figure.

1160UK(En)P1-10

05/30/2005, 9:21 AM

2