Paradyne 8747 Manual De Usuario

8700-A2-GB20-00

April 2000

Your IP addressing scheme depends in part whether the management card
controlling the chassis is running IP Conservative software.

In a configuration not running IP Conservative software, the NTU’s network
interface IP address is assigned through the peer IP address of the LTU’s
Network Interface menu.

The termination unit is assigned an IP address and subnet through the DSLAM’s
Configuration 

→

→

Set IP Address menu. Once the address is

assigned, you can use the ATI to assign:

H

Peer IP addresses to the DSL ports. These addresses are used as the IP
addresses of the remote units, and must be in the same subnet as the
DSLAM management card. See Table A-1, 

Appendix A, Configuration Options.

H

An IP address for each NMS to act as a trap manager. See Table A-14, 

, in Appendix A, Configuration Options.

The NTU obtains its IP address when the PPP link is established over the EOC.

Use the ATI to assign:

H

An IP address for each NMS. See Table A-13, 

in Appendix A, Configuration Options.

H

An IP address for the TFTP server you wish to use to upload and download
configurations. See 

 in Chapter 9, Transferring Code

and Configurations Using TFTP, and the documentation for your TFTP
server.