Black Box CDTT300A-7-R5 Manual De Usuario
18
T7 PLUS CD NETWORK TOWERS
4.1 Getting Started
1. Turn on the power switch. The status light will glow green to show that
the power is on.
2. Set the disc in the tray of the drive with the disc’s label facing up, and
push the eject button or the tray until it is accepted into the drive
completely.
completely.
The busy light changes from green to yellow while the Table of Contents
data is being read. Now the drive is ready to receive commands, and data
may be retrieved from the disc.
data is being read. Now the drive is ready to receive commands, and data
may be retrieved from the disc.
NOTE
The yellow busy light stays on if:
• The disc is not properly inserted.
• a malfunction occurs.
In such a case, eject the disc and reinsert it properly. If the busy
indicator remains lit yellow, consult your dealer or qualified
service personnel. The busy indicator also lights yellow during
audio play, but this is not a malfunction.
indicator remains lit yellow, consult your dealer or qualified
service personnel. The busy indicator also lights yellow during
audio play, but this is not a malfunction.
4.2 Ejecting the Disc
1. Turn on the power supply.
2. Press the eject button on the drive.
ON/BUSY
DISC
Press the eject
button to remove
a disc.
button to remove
a disc.