Black Box BLACK BOX 16-Port Web Smart Gigabit Ethernet Switch Manual De Usuario
Page 22
724-746-5500 | blackbox.com
LGB616A
Chapter 3: Software Description
• Forward Delay: The maximum time (in seconds) the root device will wait before
changing states (i.e., discarding to learning to forwarding). Number between
4–30 (default is 15).
4–30 (default is 15).
• Force Version: Set and show the RSTP protocol to use. Normal - use RSTP,
Compatible—compatible with STP.
Figure 3-10. RSTP system configuration.
3.2.6.2 RSTP Port Configuration
• Port: The port ID. It cannot be changed. Aggregations mean any configured
trunk group.
• Enabled: Click on the tick-box to enable/disable the RSTP protocol for the port.
• Edge: Expect the port to be an edge port (linking to an end station) or a link to
another STP device.
• Path Cost: This parameter is used by the STP to determine the best path
between devices. Therefore, lower values should be assigned to ports attached
to faster media, and higher values assigned to ports with slower media. Set the
RSTP pathcost on the port. Number between 0–200000000. 0 means auto
generated pathcost.
to faster media, and higher values assigned to ports with slower media. Set the
RSTP pathcost on the port. Number between 0–200000000. 0 means auto
generated pathcost.