Black Box Wireless P-T-P Ethernet Extender Manual De Usuario
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 17
Chapter 3: Hardware Installation
Figure 3-9. Installing the external antenna.
2. Connect your antenna with the N-type connector on the top of the Wireless P-T-P Ethernet Extender.
NOTES:
1. Before connecting the external antenna with the N-type connector to the Wireless P-T-P Ethernet Extender, users should
prepare the cable in advance, if needed.
2. While connecting the N-type connectors, users should be careful not to damage the connectors.
WARNING: Users MUST power off the Wireless P-T-P Ethernet Extender first before connecting the external antenna to it. Do not
switch from the built-in antenna to the external antenna from Web management without physically attaching the
external antenna onto the Wireless P-T-P Ethernet Extender. Otherwise, the Wireless P-T-P Ethernet Extender might be
damaged.
external antenna onto the Wireless P-T-P Ethernet Extender. Otherwise, the Wireless P-T-P Ethernet Extender might be
damaged.
3.5.4 Using the Grounding Wire
The Wireless P-T-P Ethernet Extender is shipped with a grounding wire. Properly ground the unit to protect against power surges.
1. Loosen and remove the metal O-ring on the N-type antenna connector.
2. Put the grounding wire into the connector and tighten it with the O-ring.
Figure 3-10. Connecting one end of the grounding wire.