Black Box LWE100A-KIT-W1 Manual De Usuario
724-746-5500 | blackbox.com
Page 10
724-746-5500 | blackbox.com
Chapter 2: Overview
Table 2-1. Components.
Number
Component
Description
1
(1) reverse N-type connector
Ground the connector first, then install the antenna here.
2
(3) pole mounts
You will install the pole mounting ring through these mounts.
3
(1) pole mounting ring
Secures the extender to the pole
4
(1) U.S. power plug
Connects to a power source
5
(1) 2.5-mm barrel connector
Connects to the PoE injector
6
(1) Power over Ethernet (PoE) injector
Supplies power to the extender
WARNING: Users MUST use the power cord and PoE injector shipped in the box with the Wireless P-T-P Ethernet Extender.
Using other options will damage the extender.
2.5 Typical Application
This section describes the typical applications of the Wireless P-T-P Ethernet Extender. By default, it is set to AP mode. This enables
it to establish wireless coverage; plus, it is also able to join any available wireless network under wireless client mode. The Wireless
P-T-P Ethernet Extender is able to deliver stable and efficient broadband connectivity for various applications.
it to establish wireless coverage; plus, it is also able to join any available wireless network under wireless client mode. The Wireless
P-T-P Ethernet Extender is able to deliver stable and efficient broadband connectivity for various applications.
Figure 2-4. Wireless P-T-P Ethernet Extender application.
The Wireless P-T-P Ethernet Extender can also be used in the following environments:
• Cost-effectively provide long distance backhaul for remote areas (for example, a village, oil well, island, mountain, etc.).
• Establish local backhaul for campus, farm, and factory.
• Provides access for video streaming or surveillance for industrial and mining enterprises.