Computer systems connected within a cascade arrangement are addressed using
up to four digits, two for each cascade level. The pairs of digits specify which of
the

COMPUTER CONNECTIONS

ports on each of the ServSwitch CX Uno units must

be enabled to reach a specific computer. In the diagram given here, a portion
of the previous cascade diagram indicates how the routes to two particular
computers are formed and addressed.
Each cascade level requires two digits, hence the computer marked in red
requires a longer address (1203) as it is situated at cascade level 2, compared to
the blue computer at the top level with its two digit port number.
The first time that you make a connection between an ServSwitch CX Uno IP
and an ServSwitch CX Uno, the master unit will detect this and ask (via the on
screen menu) if you want to automatically add computers. If you choose ‘Yes’
then the ports on the cascade will be automatically added to the on screen
menu.

Using cascaded computers

In use, cascaded computers can be accessed using exactly the same methods
as for those connected directly to the ServSwitch CX Uno IP. However, by far
the easiest way is to use the on screen menu. This is because it displays the
computer names and does not require any knowledge of port addresses. See
either

Selecting a computer

(for local user access) or

Host selection

(for global

user access) for more details.