Black Box kv1081a Manual De Usuario
®
Serial port configuration
This page provides all access to settings concerned with the two serial ports
(modem and power control) that are situated at the rear of the ServSwitch CX
Uno IP unit.
(modem and power control) that are situated at the rear of the ServSwitch CX
Uno IP unit.
Options Port Use
This option determines whether the RS232 serial OPTIONS port at the rear of the
unit will be used for connection to power control switches or to synchronize the
operation of two ServSwitch CX Uno IP units.
This option determines whether the RS232 serial OPTIONS port at the rear of the
unit will be used for connection to power control switches or to synchronize the
operation of two ServSwitch CX Uno IP units.
Baud Rate
This option determines the speed of the RS232 serial OPTIONS port. The other
communication settings are fixed as: No parity, 8 bit word, 1 stop bit.
This option determines the speed of the RS232 serial OPTIONS port. The other
communication settings are fixed as: No parity, 8 bit word, 1 stop bit.
To get here
1 Using VNC viewer or a browser, log on as the ‘admin’ user.
2 Click the ‘Configure’ button in the top right corner.
3 Click the ‘Serial Port Configuration’ option.
2 Click the ‘Configure’ button in the top right corner.
3 Click the ‘Serial Port Configuration’ option.