Cisco Systems 3120 Manual De Usuario
C H A P T E R
2-1
Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
OL-12246-01
2
Switch Installation
This chapter provides instructions on how to install your Cisco Catalyst Blade Switch 3120 for HP, also
referred to as the switch module, in the HP c-Class BladeSystem enclosure and how to set up and
configure your switch module. The HP c-Class BladeSystem, referred to as the blade enclosure, is a
system that supports up to 16 server modules and up to 8 Ethernet switch modules. The switch module
is installed in one of the enclosure I/O module bays on the rear panel of the server enclosure.
referred to as the switch module, in the HP c-Class BladeSystem enclosure and how to set up and
configure your switch module. The HP c-Class BladeSystem, referred to as the blade enclosure, is a
system that supports up to 16 server modules and up to 8 Ethernet switch modules. The switch module
is installed in one of the enclosure I/O module bays on the rear panel of the server enclosure.
This chapter also describes how to interpret the power-on self-test (POST) that ensures proper operation
and how to make connections to the switch module.
and how to make connections to the switch module.
Read the topics and perform the procedures in this order:
•
•
•
•
•
•
•
•
•
Preparing for Installation
This section covers these topics:
•
•
•