Cisco Systems 3120 Manual De Usuario
C-1
Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
OL-12246-01
A P P E N D I X
C
Configuring the Switch with the CLI-Based
Setup Program
Setup Program
This appendix provides a quick installation and setup procedure for the switch module by using the
command-line interface (CLI).
command-line interface (CLI).
Note
For detailed installation procedures, see
For product overview
information, see
These are the major steps for a quick installation when using the CLI:
1.
2.
3.
Accessing the CLI Through the Console Port
You can access the CLI on a configured or unconfigured switch module by connecting the console port
of the switch module to the serial port on your PC or workstation and accessing the switch module
through a Telnet session.
of the switch module to the serial port on your PC or workstation and accessing the switch module
through a Telnet session.
Connecting to the Console Port
Obtain and make note of this information from your network administrator before you begin the switch
module installation:
module installation:
•
Switch IP address
•
Subnet mask (IP netmask)
•
Default gateway (router)
•
Enable secret password (encrypted)
•
Enable password (not encrypted)
•
Telnet password
•
SNMP community strings (optional)