Black Box AC504A-WP Manual De Usuario

 

 

5.  Apply a video source to the system and 

check for an image at each receiver, then 
set the compensation Potentiometer (pot) 
for best possible image. 

Note:  If the source is Component Video 

(YPbPr) an HD15 to 3 RCA cable will 
be required for each HD15 connector.  
 
If the source is composite video with stereo audio, a similar 
cable will be needed. The RCA connectors are typically yellow 
(instead of green) for video and red/white for audio. To transmit 
CV and stereo audio, please read section 2.3 below. 

If the length of Cat5 cable is long, you need to adjust the receiver 
(AC602A) to compensate for the signal in order to perfect the image. 

Apply a video source to the system and check for an image at each 
receiver, then set the compensation Potentiometer (pot) for best 
possible image. 

Start with the compensation pot fully CCW (least compensation), then 
slowly turn it clockwise and check for the bleeding of left to right 
horizontal lines on the screen.  

 

Note dark line bleeding as a dark 
line to the right 

Note dark line has a clean transition 

Note dark line bleeding as a white line 
to the right!