Cisco Systems 11000 Series Manual De Usuario
Chapter 1 Unpacking and Installing the CSS
Installing the CSS 11800
1-12
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
To change the location of the mounting brackets on the CSS 11800 chassis from
a front-mount position to an extended-mount position:
a front-mount position to an extended-mount position:
1.
Remove the seven front mounting bracket screws from one side of the chassis.
2.
Align the rear screw holes on the bracket with the screw holes on the front
side of the chassis. Note the bracket’s proper orientation as shown in
side of the chassis. Note the bracket’s proper orientation as shown in
Figure 1-6
Aligning Brackets on the CSS 11800 Chassis for Extended Mounting
3.
Using a Phillips screwdriver, install the seven #10-32 pan-head screws
through the extended-mount bracket holes into the CSS.
through the extended-mount bracket holes into the CSS.
4.
Repeat steps 1 through 3 to install the second bracket onto the other side of
the chassis.
the chassis.
49571
Mounting
bracket
bracket
Mounting
key
key
Mounting
bracket
Mounting
key