Cisco Systems 11000 Series Manual De Usuario
Chapter 2 Cabling the CSS
Connecting Power Cords
2-30
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Connecting a CSS 11800 AC Power Cord
To connect an AC power cord to a CSS 11800:
1.
Ensure that the CSS power switch is in the 0 (off) position.
2.
Attach the power cord to the CSS by plugging the AC power cord connector
into the power receptacle at the front of the chassis as shown in
into the power receptacle at the front of the chassis as shown in
.
Figure 2-19 Connecting a CSS 11800 AC Power Cord
3.
Plug the power cord into a dedicated 3-wire grounding receptacle.
4.
Switch on the power on the CSS.
Connecting a CSS 11800 DC Power Cord
Before you install a DC power cord, see Appendix A,
for DC
power supply safety warnings.
Warning
The DC power supply cord requires 12 AWG wire. The CSS 11800 draws a
maximum of 25 amps.
maximum of 25 amps.
PS2 AC
power cord
PS2
PS1
PS1 AC
power cord
PS1 power switch
PS2 power switch
49592