Cisco Systems 5709 Manual De Usuario

January 2010

Page 230

Performing Diagnostics

Document

ENGSRVT52-CDUM100-R

uediag 

Performs all tests on all Broadcom NetXtreme II adapters in your system.

uediag -c <device#>

Specifies the adapter (device#) to test. Similar to -dev (for backward compatibility).

uediag -cof

Allows tests to continue after detecting a failure.

uediag -dev <device#>

Specifies the adapter (device#) to test. 

uediag -F

Forces an upgrade of the image without checking the version.

uediag -fbc  <bc_image>

Specifies the bin file to update the bootcode.

uediag -fbc1 <bc1_image>

Specifies the bin file to update bootcode 1.

uediag -fbc2 <bc2_image>

Specifies the bin file to update bootcode 2.

uediag -fl2b <l2b_image>

Specifies the bin file for L2B firmware.

uediag -fib <ib_image>

Specifies the bin file for iSCSI boot.

uediag -fibc

Programs iSCSI configuration block 0. Used only with -fib <ib_image>.

uediag -fibc2

Programs iSCSI configuration block 1. Used only with -fib <ib_image>.

uediag -fibp

Programs iSCSI configuration software. Used only with -fib <ib_image>.

uediag -fipmi <ipmi_image>

Specifies the bin file to update IPMI firmware.

uediag -fmba <mba_image>

Specifies the bin file to update the MBA.

uediag -fnvm <raw_image>

Programs the raw image into NVM.

uediag -fump <ump_image>

Specifies the bin file to update UMP firmware.

uediag -help

Displays the Broadcom NetXtreme II User Diagnostics (uediag) command options.

uediag -I <iteration#>

Specifies the number of iterations to run on the selected tests.

uediag -idmatch

Enables matching of VID, DID, SVID, and SSID from the image file with device IDs: Used 
only with -fnvm <raw_image>.

uediag -log <logfile>

Logs the tests results to a specified log file.

uediag -mba <1/0>

Enables/disables Multiple Boot Agent (MBA) protocol.

1 = Enable

0 = Disable

uediag -mbap <n>

Sets the MBA boot protocol.

0 = PXE

1 = RPL

2 = BOOTP

3 = iSCSI_Boot

uediag -mbav <1/0>

Enables/disables MBA VLAN.

1 = Enable

0 = Disable

uediag -mbavval <n>

Sets MBA VLAN (<65536).

uediag -mfw <1/0>

Enables/disables management firmware.

1 = Enable

0 = Disable

uediag -t <groups/tests>

Disables certain groups/tests.

uediag -T <groups/tests>

Enables certain groups/tests.

uediag -ver

Displays the version of Broadcom NetXtreme II User Diagnostics (uediag) and all installed 
adapters.