Before creating a team, adding or removing team members, or changing advanced settings of a team member, make sure
each team member has been configured similarly. Settings to check include VLANs and QoS Packet Tagging, Jumbo
Frames, and the various offloads. Advanced adapter properties and teaming support are listed in

Table 7

All adapters on the team must support this feature. Some adapters may not support this feature if ASF/IPMI is also enabled.

Must be supported by all adapters in the team.

Only for Broadcom adapters.

As a PXE sever only, not as a client.

A team does not necessarily inherit adapter properties; rather various properties depend on the specific capability. For
instance, an example would be flow control, which is a physical adapter property and has nothing to do with BASP, and will
be enabled on a particular adapter if the miniport driver for that adapter has flow control enabled.

NOTE: All adapters on the team must support the property listed in

Table 7

in order for the team to support the

property.

Table 7: Advanced Adapter Properties and Teaming Support

Adapter Properties

Supported by Teaming Virtual Adapter

Checksum Offload

Yes

IEEE 802.1p QoS Tagging

Large Send Offload

Yes

TCP Offload Engine (TOE)

Yes

b, c

Jumbo Frames

Yes

IEEE 802.1Q VLANs

Yes

Wake on LAN

Preboot Execution environment (PXE)

Yes