Cisco Systems 5709 Manual De Usuario
User Guide
NetXtreme II
January 2010
Bro a d c o m Co rp o r a ti o n
Document
ENGSRVT52-CDUM100-R
Viewing or Modifying Adapter Properties
Page 143
TxPacketsPer=
Enables allowing an interrupt to occur after a specific amount of packets is transmitted.
Min = 0 (Disabled)
Max = 100
Max = 100
The default value is 20.
RxPacketsPer=
Enables allowing an interrupt to occur after a specific amount of packets is received.
Min = 0 (Disabled)
Max = 100
Max = 100
The default value is 75.
CheckSum=
Enables or disables the transmit and receive checksum offload feature. Checksum offload support is only for TCP/IP
packets; therefore, the default setting for checksum offload is OFF.
packets; therefore, the default setting for checksum offload is OFF.
OFF
ON
TX
RX
ON
TX
RX
FlowCtrl=
This keyword allows enabling/disabling of transmit and receive flow control.
BOTH
RX
TX
OFF
RX
TX
OFF
The default setting is OFF.
PDriver=
Enables the driver to operate in persistent driver mode. Use only if the adapter is placed in a hot-plug slot and only if you
must swap with an adapter that is exactly the same.
must swap with an adapter that is exactly the same.
OFF
ON
ON
The default setting is OFF.