Cisco Systems 611 Manual De Usuario
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
1-12
Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02
Ethernet Port Connector
The WAE appliance comes with one integrated dual-port Ethernet controller. This
controller provides an interface for connecting to 10-Mbps, 100-Mbps, or
1000-Mbps networks and provides full-duplex (FDX) capability, which enables
simultaneous transmission and reception of data on the Ethernet LAN.
controller provides an interface for connecting to 10-Mbps, 100-Mbps, or
1000-Mbps networks and provides full-duplex (FDX) capability, which enables
simultaneous transmission and reception of data on the Ethernet LAN.
To access the Ethernet port, connect a Category 3, 4, or 5 unshielded twisted-pair
(UTP) cable to the RJ-45 connector on the back of the device.
(UTP) cable to the RJ-45 connector on the back of the device.
Note
The 100BASE-TX/1000BASE-TX Ethernet standard requires that the cabling in
the network be Category 5 or higher.
the network be Category 5 or higher.
shows the pin number assignments for the Ethernet RJ-45 port.
SCSI LVD port
(WAE-611 only) (See
(WAE-611 only) (See
)
Use this port to attach an external Cisco
Storage Array device.
Storage Array device.
Fibre Channel port (on
optional adapter)
optional adapter)
This port provides the option to connect to an
external Fibre Array device or SAN
external Fibre Array device or SAN
1
for added data
storage capacity.
Audio/video port (on
optional MPEG A/V
decoder adapter)
optional MPEG A/V
decoder adapter)
•
3 BNC
2
connectors for YUV, RGB
3
, and
composite video output
•
Mini-XLR 8-pin connector for S/PDIF
4
and
analog stereo audio output
•
Mini-XLR 8-pin connector for VGA
5
output
1.
SAN = storage area network
2.
BNC = Bayonet Neill-Concelman
3.
RGB = red green blue
4.
S/PDIF = Sony/Philips Digital Interface
5.
VGA = video graphics array
Table 1-5
Back Panel Ports and Connectors (continued)
Item
Description