Cisco Systems 611 Manual De Usuario

Press the power control button on the front of the device.

The system should begin booting. Once the operating system boots, you are ready 
to initialize the basic software configuration. (See the 

 for a list of software configuration documents.)

While the device is powering up, the power LED on the front of the 
chassis is green.

You can install a circular disk over the power control button to prevent accidental 
manual power down. This disk, known as the power control button shield, comes 
with the device.

When the device is up and running, observe the front panel LEDs. To verify that 
your system is operating properly, see the 

Before working on a system that has an on/off switch, turn OFF the power and 
unplug the power cord. Statement 1

Ultimate disposal of this product should be handled according to all national 
laws and regulations. Statement 1040

To remove a device from your network, power it down, disconnect the power 
cords and network cables, and physically remove the chassis from the rack.