Cisco Systems 566 Manual De Usuario
4-17
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 4 Installing Hardware Options
Completing the Installation
Installing the Content Engine Cover and Bezel
Complete the following steps to install the Content Engine cover and bezel:
Step 1
Install the cover by placing it into position and sliding it forward. Then tighten
the captive screws (labeled 1 in
the captive screws (labeled 1 in
).
Caution
Before sliding the cover forward, make sure that the cover will properly engage
the ledge at the front of the Content Engine.
the ledge at the front of the Content Engine.
Step 2
Install the bezel.
a.
Align the hooks on the bottom of the bezel with the Content Engine.
b.
Press the bezel toward the Content Engine until it clicks into place.