Cisco Systems 511 Manual De Usuario
2-5
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 2 Preparing to Install the Content Engine
Safety Guidelines
–
The product has been exposed to water.
–
The product has been dropped or damaged.
–
The product does not operate correctly when you follow the operating
instructions.
instructions.
•
Keep your system components away from radiators and heat sources. Also,
do not block cooling vents.
do not block cooling vents.
•
Do not spill food or liquids on your system components, and never operate
the product in a wet environment.
the product in a wet environment.
•
Do not push any objects into the openings of your system components. Doing
so can cause fire or electric shock by shorting out interior components.
so can cause fire or electric shock by shorting out interior components.
•
Use the product only with other Cisco-approved equipment.
•
Allow the product to cool before removing covers or touching internal
components.
components.
•
Use the correct external power source. Operate the product only from the type
of power source indicated on the electrical ratings label. If you are not sure
of the type of power source required, consult your service representative or
local power company.
of power source indicated on the electrical ratings label. If you are not sure
of the type of power source required, consult your service representative or
local power company.
•
Use only approved power cables. If you have not been provided with a power
cable for your Content Engine or for any AC-powered option intended for
your system, purchase a power cable that is approved for use in your country.
The power cable must be rated for the product and for the voltage and current
marked on the product’s electrical ratings label. The voltage and current
rating of the cable should be greater than the ratings marked on the product.
cable for your Content Engine or for any AC-powered option intended for
your system, purchase a power cable that is approved for use in your country.
The power cable must be rated for the product and for the voltage and current
marked on the product’s electrical ratings label. The voltage and current
rating of the cable should be greater than the ratings marked on the product.
•
To help prevent electric shock, plug the system components and peripheral
power cables into properly grounded electrical outlets. These cables are
equipped with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable. If you must use
an extension cord, use a three-wire cord with properly grounded plugs.
power cables into properly grounded electrical outlets. These cables are
equipped with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable. If you must use
an extension cord, use a three-wire cord with properly grounded plugs.
•
Observe extension cord and power strip ratings. Make sure that the total
ampere rating of all products plugged into the extension cord or power strip
does not exceed 80 percent of the extension cord or power strip ampere
ratings limit.
ampere rating of all products plugged into the extension cord or power strip
does not exceed 80 percent of the extension cord or power strip ampere
ratings limit.
•
Do not use appliance or voltage converters or kits sold for appliances with
your product.
your product.