Cisco Systems 511 Manual De Usuario
4-13
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 4 Installing Hardware Options
Working with Hard Disk Drives
Step 5
Install the hard disk drive in the bay.
a.
Align the drive assembly (see
) with the guide rails in the bay.
b.
Gently push the drive assembly into the drive bay until the drive connects to
the backplane.
the backplane.
c.
Check the hard disk drive status LED to verify that the hard disk drive is
operating properly.
operating properly.
If the amber hard disk drive status LED for a drive is lit continuously, that
individual drive is faulty and needs to be replaced. If the green hard disk drive
activity LED is flashing, the drive is being accessed.
individual drive is faulty and needs to be replaced. If the green hard disk drive
activity LED is flashing, the drive is being accessed.
Figure 4-5
Installing a SATA Hard Disk on CE-511
124005
SATA hard disk
drive connector
Hard disk drive