Black Box AC151A-REM Manual De Usuario
11
CHAPTER 3: Installation
5. Plug the CAT5 twisted-pair cables that will run to your Remotes into the
Hub’s RJ-45 jacks labeled “TO REMOTE UNIT.”
6. Plug the external transformer’s attached output cable to the Hub’s 4-pin DIN
female connector labeled “9 VAC.” Plug the IEC 320 female end of the
transformer’s input cord into the IEC 320 male inlet on the transformer. Plug
the other end of the input cord into a working AC outlet.
transformer’s input cord into the IEC 320 male inlet on the transformer. Plug
the other end of the input cord into a working AC outlet.
Figure 3-1. The rear panel of the Splitter Hub (4-channel model shown) and
its device (IBM PC shown), Remote, and power attachments.
CAT5 STP
cables to
Remotes
RJ-45 M to
Remotes 1
through 4
RJ-45 M to
ports 1
through 4
Local
monitor
Keyboard
4-pin DIN M
to Power port
Mouse
Power
supply
supply
Stereo
audio cable
To AC
outlet
VGA video-extension cable
Local
speakers
HD15 M to Local
Monitor port
HD15 F to
Video In port
HD15 M to
VGA Out port
6-pin mini-DIN M to
keyboard and mouse ports
3.5-mm stereo plug
to Audio In port
3.5-mm stereo plug
to Speakers, Aux
Out , etc. port
3.5-mm stereo plug
to Audio Out port
Splitter
Hub
CPU