Cyclades ACS48 Manual De Usuario

24

1. Enter the escape character.

The escape character is shown when you first connect to the port. 
In character/text Mode, the Escape character is ^] (caret and bracket, for 
telnet) or ~. (tilde and period, for SSH).

After entering the escape character, the following menu is shown:

Console escape. Commands are:

l go to line mode

c go to character mode

z suspend telnet

b send break

t toggle binary

e exit telnet

2. Press “e” to exit from the session and return to the original menu. 

Select the exit option and you will return to the shell prompt.

From Telnet
You have to be sure that a different escape character is used for exiting your 
telnet session; otherwise, if you were to exit from the session created through 
the ts_menu, you will close your entire telnet session to your unit. 
To do this, when you first telnet to your unit, use the “-e” option. 

Example: to set Ctrl-? as the escape character, type:

telnet -e ^? 192.168.160.10 

To exit from the session created through the ts_menu, just follow Step 1 from 
above. To exit from the entire telnet session to your unit, type the escape 
character you had set.

From SSH
If you use SSH to make the first connection to the ACS, then the escape 
character for each session becomes: ~~. (tilde, tilde, period)