Canon WUX400ST Manual De Usuario
82
Split-Screen Display
3
If
or
is displayed in the center of the image area, you can switch control
to the other side by pressing the [ ] / [ ] buttons on the remote control.
(Example of display in split-screen mode.)
4
Press the INPUT button to select the input signal for the side with control
rights.
The [Input] menu is displayed. To determine which side is currently under
control, check the screen ID in orange in the upper right of the menu. The side
without control rights is labeled with a white circle.
For details on selecting input signals, refer to “Selecting an Input Signal” (
rights.
The [Input] menu is displayed. To determine which side is currently under
control, check the screen ID in orange in the upper right of the menu. The side
without control rights is labeled with a white circle.
For details on selecting input signals, refer to “Selecting an Input Signal” (
To exit split-screen display, press the EXIT button on the remote control.
Current input signal of side
with control rights
Current input signal of side
without control rights
with control rights
Current input signal of side
without control rights
Side currently under
control (input signal can
be switched)