Runco LS-HB Manual De Usuario
Runco LS-HB/LS-HB Ultra Installation/Operation Manual
29
PRE
L
IMINAR
Y
Installing the Fixed
Anamorphic Lens Base
Plate
Anamorphic Lens Base
Plate
To install the base plate on an LS-HB with a fixed anamorphic lens:
1.
Place the projector upside down on a blanket or other soft surface.
2.
Secure the base plate and Ceiling Mount Plate (if used) to the projector with the four,
M4 x 0.7 x 14mm screws provided with the anamorphic lens base plate.
M4 x 0.7 x 14mm screws provided with the anamorphic lens base plate.
Figure 3-6. Projector with Fixed Anamorphic Lens Base Plate - Bottom View
1. Do not use the mounting screws provided with the ceiling
mounting kit. Use only the hardware provided with the
anamorphic lens base plate.
anamorphic lens base plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Caution
Ceiling Mount Plate
(part of Ceiling Mount Kit)
(part of Ceiling Mount Kit)
Anamorphic
Lens Base Plate
Lens Base Plate
Screw,
Phillips
Pan-Head,
M4 x 0.7 x
14mm (4x)
Phillips
Pan-Head,
M4 x 0.7 x
14mm (4x)
1
2