Sanyo HF15000L Manual De Usuario

r

 

  When using the wired remote control, connect the 

wired remote control to this jack with a remote 

control cable (not supplied).

e 

  USB connector is to used to service the projector.

y

 

  Connects the S-VIDEO output signal from video 

equipment to this jack (p.21).

q SERIAL PORT IN TERMINAL

  If you control the projector from a computer, you 

must connect a cable (not supplied) from your 

computer to this RS-232C terminal.

w SERIAL PORT OUT TERMINAL

  This terminal outputs signal from SERIAL PORT IN. 

More than two projectors can be controlled with 

one computer by connecting SERIAL PORT IN of 

another projector to this RS-232C terminal.

u 

  Connects the component or composite video 

output signal from video equipment to VIDEO/Y, 

Pb/Cb, and Pr/Cr jacks or connect the computer 

output signal (5 BNC Type [Green, Blue, Red, 

Horiz. Sync, and Vert. Sync.]) to G, B, R, H/HV, and 

V jacks (pp.20–21).

q

w

y

u

!0 

  Connects computer output (Digital/DVI-D type) to 

this terminal (p.20).

  HD (HDCP Compatible) signal can be also 

connected (p.21).

i

 ANALOG TERMINAL

Connects the computer (or RGB scart) output 

signal to this terminal (pp.20–21).

t

r

e

t 

  Connecting the Ethernet cable See the owner’s 

manual of “Network Set-up and Operation” for 

details.

o

 

  Connects the HDMI output signal from video 

equipment to this terminal. (pp.20-21)

o

i

!0