Sanyo HF15000L Manual De Usuario

PC system can also be selected manually.

Selected system is 

displayed.

Press the MENU button to display the on-screen menu. 

Use the Point ed buttons to select Input and then 

press the Point 8 or the SELECT button. 

Use the Point ed buttons to select System and then 

press the Point 8 or the SELECT button.

Use the Point ed buttons to select the desired system 

and then press the SELECT button.

Systems in this dialog box 

can be selected.

Customized Mode (1-

10) set in the PC adjust 

menu (pp.38, 39).

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC 

adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format 

and tunes to project a proper image without any additional settings. (Signal formats provided in this projector 

are shown on pages 89-91)

When the projector cannot recognize the 

connected signal conforming to the provided 

PC Systems, Auto is displayed on the System 

Menu box and the Auto PC adjustment function 

works to display proper images. If the image is 

not projected properly, a manual adjustment is 

required (pp.38, 39).

There is no signal input from the computer. 

Check the connection between your computer 

and the projector. (See “Troubleshooting” on 

pp.80-82.)

The preset system is manually adjusted in the PC 

adjust menu. The adjusted data can be stored in 

Mode 1-10 (pp.38, 39).

PC Systems provided in this projector is chosen.  

The projector chooses a proper system provided 

in the projector and displays it.  

*Mode 1 and SVGA 1 are examples.  

One of the following messages may appear when: