Toshiba TDP-TW420 Manual De Usuario
34
35
Operations
How to set password (from [Off] to [On])
1
Select [Password] in the Default setting 2 menu and press the
or
button.
2
Select [Password setting] next, and press the
or
button.
3
Select [On].
4
Select [OK] and press the
button.
The password entry screen is displayed.
5
Enter the password using numeric keys of the remote control.
6
The password setting will be set as [On].
How to operate when password is [On]
1
Turn on the power.
2
The lamp lights and the password entry screen appears.
3
Enter the password using numeric keys of the remote control.
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is wrong, a message appears to prompt
you to re-enter the password, and again the password entry screen is displayed. If
you enter a wrong password for more than 5 times, the projector will automatically
power off and enter standby mode.
goes into normal operation. If the password is wrong, a message appears to prompt
you to re-enter the password, and again the password entry screen is displayed. If
you enter a wrong password for more than 5 times, the projector will automatically
power off and enter standby mode.
Note
When the password setting is [On], the password function will be enabled only
when the projector is restarted after the main power switch has been turned off.
The password that you set will not be enabled when restarting from standby mode
without turning off the main power switch.
when the projector is restarted after the main power switch has been turned off.
The password that you set will not be enabled when restarting from standby mode
without turning off the main power switch.
How to set password (from [On] to [Off])
1
Select [Password] in the Default setting 2 menu and press the
or
button.
The password entry screen is displayed.
2
Enter the password using numeric keys of the remote control.
3
Select [Password setting] next, and press the
or
button.
4
Select [OFF].
5
Select [OK] and press the
button.
•
Using handy features (Continued)
Using the menus 1
You can call up on-screen menus, and conduct a number of adjustments and settings using
the MENU button
the MENU button
p.16
on the control panel (main unit side) and remote control.
Setup using the Setting display
The menu shown below is for operation instructions purposes and might differ from the
actual display.
actual display.
Toggle items with
.
Select items with and press
.
Fix selection with
.
Display the Setting display menu.
1. Press the MENU button
2. Select a Category
2. Select a Category
3. Adjustments & Settings
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
be selected from the list by using
.
After an item is selected, apply it by
pressing
pressing
.
Press or to open the menu.
These marks
signify that there
are options.
Press or
to display a list of
options.
signify that there
are options.
Press or
to display a list of
options.
* When no item is
changed, press
.
4. End
Press the MENU button once more.
(The menu will disappear automatically after 30 seconds, if no operation is conducted.)
Select a category by using
.
There are following 6 categories:
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
p.36
Image adjustment menu
p.37
Position adjustment menu
p.38
Display setting menu
Default setting 1 menu
p.41
Default setting 2 menu
p.42
Status display menu
p.43
These marks signify
that there are setting
screens. Press or
to display a list of
setting screens.
that there are setting
screens. Press or
to display a list of
setting screens.
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
refer to the following applicable pages for the menu item you desire.
• To return to previous item, press the RETURN button.
• When Network or USB memory input is selected, pressing the MENU button twice displays the Setting display (2) menu.
• When Network or USB memory input is selected, pressing the MENU button twice displays the Setting display (2) menu.
N